PROTEAN® II xi Cell for 1-D Electrophoresis

PROTEAN® II xi Cell for 1-D Electrophoresis

Overview

The PROTEAN II xi cell is a large-format vertical 1-D electrophoresis chamber that accommodates up to four 16 x 16 cm or 16 x 20 cm handcast gels for SDS-PAGE, native PAGE, and agarose gel electrophoresis.

Read full description

Description

Description

The PROTEAN® II xi cell is a large format vertical electrophoresis cell that is used for the most common for 1-D electrophoresis techniques such as SDS-PAGE, native electrophoresis, and agarose gel electrophoresis. The PROTEAN II xi cell is available in two sizes to accommodate up to four* 16 x 16 cm or 16 x 20 cm gels.

Key Features

  • Accommodates handcast gels
  • Patented single-screw clamps on the casting stand that exert uniform pressure along the entire length of the glass plates provide a leakproof seal without agarose plugs or grease
  • Central cooling core can be connected to tap water or a cooled recirculating bath, or filled with coolant, providing smile-free patterns with as little as 1.5 L buffer
  • Choice of glass plates, spacers, and sandwich clamps to cast 2 gel lengths, 16 or 20 cm
  • Ability to cast multiple gradient gels using the PROTEAN II multi-gel casting chamber, the Model 495 gradient former, and the appropriate exponential piston. Use of the gel clip facilitates handling of large gels
  • Notched plates allow up to four 16 x 16 cm or 16 x 20 cm handcast gels to be run simultaneously (not recommended for 2-D applications)
  • Optional frosted glass plates for high-resolution vertical agarose gel electrophoresis of nucleic acids
  • Comb conversion screws convert any PROTEAN II xi comb from a standard 25 mm well depth to a 10 mm depth to simplify comb removal

 

Ordering

Ordering

items

Use the filters below to refine results!

1651815
Kit converts PROTEAN II xi cell into a tube gel IEF 2-D system; includes 2 tube gel adaptors, 24 glass tubes (1.5 mm ID, 180 mm length), gaskets, grommets, stoppers

Accessories

Accessories

Image
165-1832_tn.jpg
1651832
Pkg of 1, 16 x 20 cm, 16 cm bevel length, glass plate for double-up procedures, for 16 cm PROTEAN II xi electrophoresis cell only
Image
165-1805_tn.jpg
1651805
Pkg of 1 set, replacement electrode cables, for PROTEAN II xi electrophoresis cells
9007680-13
Pkg of 1, 13" anode wire for PROTEAN II xi and XL cells
Image
165-1806_tn.jpg
(Discontinued) Central Cooling Core
1651806
Pkg of 1, cooling device for PROTEAN II xi and PROTEAN II XL electrophoresis cells; includes 2 gaskets
Image
165-1807_tn.jpg
(Discontinued) Buffer Tank
1651807
Pkg of 1, buffer tank for PROTEAN II xi and PROTEAN II XL electrophoresis cells
Image
165-1808_tn.jpg
(Discontinued) Cell Lid
1651808
Pkg of 1, lid for PROTEAN II xi and PROTEAN II XL electrophoresis cells; includes power cables
Image
165-1859_tn.jpg
1651859
Pkg of 10 each comb conversion and standard screws, for conversion of 2 PROTEAN II xi combs from 25 mm to 10 mm well depth (agarose gels)
9007680-10
Pkg of 1, 10" cathode wire for PROTEAN II xi and XL cells

Documents

Documents

Number Description Options
4106107
Instruction Manual, PROTEAN® II xi Cell IPG Conversion Kit, Rev B
1760
PROTEAN® II xi and XL Cells PIS, Rev F
3095
2-D Electrophoresis: Tools for Rapid, High-Resolution Protein Separations Brochure, Rev B
M1651801
Instruction Manual, PROTEAN II xi Cell, Rev C