Tutorials

• Bio-Plex^® 200 System: Adjusting Sample Needle/Probe Height

  Learn how to adjust the sample probe needle on the Bio-Plex System to accomodate different microplates.

  2:43

• Bio-Plex^® 200 System: Cleaning and Changing the Sample Needle/Probe

  Learn how to change the sample probe needle on the Bio-Plex System when cleaning the needle or replacing it with a new needle.

  2:08

• Bio-Plex^® 200 System: Sample Needle/Probe Cleaning

  Learn how to clean the probe needle on the Bio-Plex System to keep sample pickup running smoothly and prevent needle clogging.

  1:37

See all immunoassays videos »

• Cleaning the TC10™ and TC20™ Print Head

  This brief tutorial shows how to clean the print heads on the printer supplied with the TC10 and TC20 Automated Cell Counters.

  1:40

• PureBlu™ DAPI Nuclear Staining Dye for Fixed Cells — A Fast Approach to Staining Nuclei

  This brief tutorial demonstrates the use of PureBlu DAPI Dye with the ZOE™ Fluorescent Cell Imager for routine nuclear staining in fluorescence microscopy and cell imaging applications.

  2:57

• PureBlu™ Hoechst 33342 Nuclear Staining Dye for Live Cells — A Fast Approach to Staining Nuclei

  This brief tutorial demonstrates the use of the PureBlu Hoechst 33342 Dye with the ZOE Fluorescent Cell Imager for routine nuclear staining in fluorescence microscopy and cell imaging applications.

  2:45

See all cell counting and staining videos »

• Cleaning the Streams Camera Window on the S3e™ Cell Sorter

  In this video we show you how to clean the camera streams window as part of routine maintenance for your S3e™ Cell Sorter.

  2:34

• Cleaning the Nozzle Tip on the S3e™ Cell Sorter

  In this short video, we show how to clean the nozzle tip on the S3e™ Cell Sorter. A partially or fully clogged nozzle can disrupt any cell sorting process.

  3:28

• Performing a Fluidics Hot Swap on the S3e™ Cell Sorter

  In this video, we show how a fluidics hot swap can be performed without shutting down the S3e™ Cell Sorter.

  3:29

• PowerPac™ Power Supplies: Troubleshooting the E01 Error Message

  This video demonstrates some troubleshooting steps when encountering the "E01: No load detected" error message on Bio-Rad's PowerPac Power Supplies.

  2:47

• TGX Stain-Free™ FastCast™ Acrylamide Gel Casting

  This short video demonstrates how you can access the unique benefits of Bio-Rad's proprietary TGX Stain-Free Gel chemistry by Hand Casting your own TGX Stain-Free Gels in just a few quick and easy steps.

  3:05

• Trans-Blot^® Turbo™ Transfer System Maintenance: Pogo Pin and Leaf Spring Cleaning

  This short video describes how easy it is to clean the pogo pins and leaf springs on the Trans-Blot Turbo Rapid Blotting System.

  1:48

• ChemiDoc™ Imaging Systems: Correcting Grainy Images

  This video explains the process for correcting grainy image issues when using the Image Lab™ Software that comes with ChemiDoc Imaging Systems.

  2:26

• ChemiDoc™ XRS+ System Installation

  This short video describes how to install your new ChemiDoc XRS+ Imaging System.

  5:49

• ChemiDoc™ MP Imaging System – LED Installation

  This brief tutorial demonstrates how to set up and install the LEDs in the ChemiDoc MP Imaging System.

  1:36

See all gel imaging videos »

• NGC Chromatography System: Attaching a DynaLoop™ Sample Loop

  This video describes the three main steps in attaching a DynaLoop Sample Loop to the NGC™ Chromatography System to enable the injection of larger sample volumes: connecting the DynaLoop Sample Loop to the NGC Chromatography System, priming the DynaLoop Sample Loop, and creating a method in ChromLab™ Software

  4:10

• NGC Chromatography System: Calibrating the pH Valve

  In this video, you'll learn how to connect the pH valve to the NGC System, add it to the flow path, and calibrate the valve using buffers at two different pH values.

  3:21

• NGC Chromatography System: Changing a Bulb in the Multi-Wavelength Detector

  This video shows the steps in lamp replacement: removing the MWD module from the system, accessing the deuterium and tungsten lamps, and removing and replacing the lamps.

  3:06

See all chromatography videos »

• Introduction to CHT™ Ceramic Hydroxyapatite Resin for Biomolecule Purification

  This short animation provides a brief introduction to Bio-Rad’s innovative mixed-mode chromatography media, CHT™ Ceramic Hydroxyapatite, describes its unique separation properties and selectivity, and explains how these properties benefit downstream processing in biotherapeutic drug development.

  3:17

• Packing CHT™ Media in an Axial Compression Column System

  Bio-Rad offers opdtimized protocols for packing and unpacking CHT Ceramic Hydroxyapatite Resins in an axial compression column system to ensure reproducible, high-quality results and extend media life.

  4:17

• Packing CHT™ Resin in an Open Process Column

  These guidelines for handling and packing CHT™ Ceramic Hydroxyapatite Resin in an open process column are recommended for best results with CHT Resins.

  3:06

See all process chromatography videos »

• How to Order PrimePCR™: Primers, Probes, and Panels

  This brief tutorial demonstrates how to order PrimePCR and Droplet Digital™ PCR Assays from Bio-Rad.com.

  2:51
• 

  PrimePCR Assays: Create a Custom PCR Plate

  Learn how to create a custom PrimePCR plate with ease on Bio-Rad.com.

  4:54

• PrimePCR™ Pathway and Disease Panels — How to Modify a Predesigned Plate

  This brief tutorial demonstrates how to modify a predesigned PrimePCR Assay plate on Bio-Rad.com.

  5:14

• Supply Center Inventory Cycle Count

  Learn how to take an inventory count of the products stored in your Supply Center.

  1:34

• Setup and Placing of Products

  It just takes a few minutes to set up your Supply Center to store the Bio-Rad products you use most.

  1:56

• Bio-Rad Automated Supply Center Kiosk Inventory

  Learn how to take an inventory count of the products stored in your Automated Supply Center Kiosk.

  2:05

See all Supply Center videos »

• Bio-Plex Manager™ and Bio-Plex Data Pro™ Software – Streamline Multiplex Data Analysis

  This webinar will teach you how to customize data views, evaluate the quantitation, and export data for further analysis.

  28:51

• CFX Manager™ Software Part 1: Setting Up Your Protocol

  This brief tutorial demonstrates how to set up a protocol in CFX Manager Software v3.1.

  2:40

• CFX Manager™ Software Part 2: Setting Up Your Plate

  This brief tutorial demonstrates how to set up a qPCR plate in CFX Manager Software v3.1

  4:18

See all Software Tutorials »