Description
Description
The Bio-Plex 200 system integrates xMAP suspension array technology with a reliable workstation, dedicated software, and validation tools.
The following components and consumables can be ordered separately for the Bio-Plex 200 system: sample needle, alignment guide, needle adjustment wrench, protective shield for sample needle, air intake filter, syringe seal, syringe seal with cylinder, sheath fluid, sheath fluid bottle, sheath waste bottle, sheath fluid filter with quick connect tubing, sheath cube filter, sheath cube filter with tubing.
Specifications
Specifications
Environment conditions
Operating temperature
15–30°C (59–86°F)
Operating humidity
20–80%, noncondensing
Operating altitude
Designed to operate at up to 2,000 m (6,600') mean sea level
Compensatory range
±2°C
UL installation category
UL Installation Category II, as defined in Annex J of UL 3101–1
Pollution degree
UL Pollution Degree 2, as defined in Section 3.7, 3.2, of UL 3101–1
Bio-Plex Array Reader Specifications
Input voltage range
100–240 V, 1.5 A, 47 – 63 Hz
Physical dimensions
43 x 51 x 23 cm (W x D x H)
Weight
23 kg (60 lb)
Lasers
Reporter laser
532 nm, >10 mW, frequency-doubled diode; 30 x 60 µm elliptical beam
Classification laser
635 nm, 10 mW, diode; 30 x 60 µm elliptical beam
Fluidics
Sheath flow rate
90 µl/sec
Cuvette
200 µm square flow channel
Sample injection rates
60 µl/sec
Electronics
Reporter channel detection
Photomultiplier tube, A/D resolution 14 bits
Classification and doublet discriminator channel detection
Avalanche photodiodes with temperature compensation, A/D resolution 12 bits
Communication interface
RS–232
Signal Processing
Measurement resolution
15 bits effective
Processor modes
Linear, with logarithmic or linear display option
Dynamic range
70 dB
Bio-Plex Microplate Platform Specifications
Input voltage range
100–240 V, 1.8 A, 47–63 Hz
Physical dimensions
44 x 61 x 8 cm (W x D x H)
Weight
14.4 kg (32 lb)
Communications interface
RS–232
Plate capacity
One 96–well microtiter plate "≤0.75"
Ordering
Ordering
items
Use the filters below to refine results!
Image
(Discontinued) Bio-Plex® Handheld Magnetic Washer
171020100
Includes magnetic washer and adjustment hex tools for use in manual wash steps for all Bio-Plex Magnetic Assays
Image
(Discontinued) Sheath Fluid
171000055
20 L, 1x fluid in cube container with pour spout, for use with the Bio-Plex® 200 and Bio-Plex 3D system array readers and high-throughput fluidics (HTF) system
Image
(Discontinued) Sheath Fluid Bottle
171002010
Pkg of 1, 1 L polypropylene bottle with sheath-fluid and air-intake ports and tubing, for use with the Bio-Plex 200 system
Image
(Discontinued) Sheath Waste Bottle
171002012
Pkg of 1, 1 L polypropylene bottle with waste port and tubing, for use with the Bio-Plex 200 system
Image
(Discontinued) Sample Needle
171002020
Pkg of 1, 11.6 cm (4.6"), long stainless steel sampling needle for use with the Bio-Plex 200 system
Image
(Discontinued) Alignment Guide with Shipping Pin
171002024
Pkg of 1, replacement fitting and blue shipping pin for Bio-Plex 200 system; aligns array reader on microplate platform
Image
(Discontinued) Needle Adjustment Wrench
171002026
Pkg of 1, tool for adjusting sample needle on the Bio-Plex 100 system
Image
(Discontinued) Protective Shield for Sample Needle
171002030
Pkg of 1, covering for sample needle on the Bio-Plex 200 system
Image
(Discontinued) Air Intake Filter
171002032
Pkg of 1, replacement maintenance part for the Bio-Plex 200 system
Image
(Discontinued) Syringe Seal
171002033
Pkg of 4, replacement maintenance parts for syringe plunger on the Bio-Plex 200 system
Image
(Discontinued) Syringe Seal With Cylinder
171002034
Pkg of 1, replacement syringe assembly for internal fluidics system on the Bio-Plex 200 system
Image
(Discontinued) Sheath Fluid Filter With Quick Connect Tubing
171002038
Pkg of 1, replacement maintenance part for internal fluidics system on the Bio-Plex 200 system; removes >5 μm diameter particles
Image
(Discontinued) Sheath Cube Filter
171002040
Pkg of 1, replacement maintenance part for use with high-throughput fluidics (HTF) system and Bio-Plex 200 system; removes >10 µm diameter particles
Image
(Discontinued) HTF Tubing
171002056
Pkg of 1, air tubing HTF to reader, sheath tubing HTF to reader, tubing sheath container to HTF (including 10 µm filter), and waste tubing (reader to waste container)
Image
(Discontinued) Communication Cable
171002001
Pkg of 1, 5 ft DB9 cable, connects Bio-Plex 200 system microplate platform with PC serial port
Image
(Discontinued) Communication Cable
171002002
Pkg of 1, 3 ft CAN BUS cable, connects Bio-Plex 200 system array reader with high-throughput fluidics (HTF) system
Image
(Discontinued) Communication Cable
171002003
Pkg of 1, 5 ft USB cable, connects Bio-Plex 200 system array reader with PC USB port
Image
(Discontinued) Needle Guide
171002023
Pkg of 1, replacement fitting for Bio-Plex 100 system; allows sample needle access to microplates
Documents
Documents
Login Required Number Description Options
3076
Bio-Plex Care and Maintenance Quick Guide, Rev B
2993
Bio-Plex Glossary, Rev A
4100205
Bio-Plex Maintenance Log, Rev A
2879
Bio-Plex System Tools Brochure, Rev C
3000
Correlation of Bio-Plex Suspension Array Reader Validation With Multiplex Cytokine Assay Performance, Rev A