PCR Plastics Selector
Use our interactive selector tool to find the best products for your experiements: plates, tubes, seals, and accessories.Selection Guide
Bio-Rad offers a wide selection of accessories for PCR plates, seals and tubes: sealing and capping tools, pressure pads, positioners for automation, lids, racks, and other tools.
Easy Cap tool — This multifunctional tool facilitates cap opening and closing. It prevents crushing of 0.5 ml thin-wall PCR tubes, and it properly seats domed caps in 0.2 ml PCR tubes or plates.
Strip cap tool — The strip cap tool quickly and easily seats 8- and 12-cap strips on PCR plates and tubes. A grooved channel on one side is designed to seal domed caps, while the flat edge on the opposite side is for flat caps. For best results, seat tube strips while they are in the thermal cycler block or in a 96-place rack.
96-place PCR tube rack and cover — These stackable storage units for tubes and unskirted and semi-skirted PCR plates also provide a stable platform for preparing or centrifuging reactions.
Sealing roller — The sealing roller firmly seats PCR plate sealers and is strongly recommended for applying the firm pressure needed when using Microseal 'A' film, 'B' adhesive seals, and 'F' foil. It ensures that the seal is properly seated over each well. For best results, place the PCR plates in the cycler block or on a sturdy rack before using the roller.
MyCycler sample loading tray —The MyCycler sample loading tray simplifies work with thin-wall PCR tubes and is recommended for use with 0.2 ml tubes. Use of this tray in the reaction block ensures uniform contact between the heated lid and each sample, and it facilitates sample loading and removal. The tray can be used to hold thin-wall tubes during PCR assay setup and provides convenient, stackable post-PCR storage of 0.2 ml tubes.
Pressure pad — The foam pressure pad can improve film-sealing performance, especially when low-profile PCR plates are used in thermal cyclers with nonadjustable lids, such as the MyCycler and iCycler thermal cyclers. The pad has an orange foam side and a black magnet side. The black magnet side should face down to the plates so that it will not stick to the cycler's metal lid.
Heat sealer support plate — The heat sealer support plate ensures optimal automated heat sealing of Hard-Shell thin-wall 384-well plates using common heat sealers. Place the thin, aluminum heat sealer support plate under the wells of the PCR plate while sealing (raised surface facing up). The plate will provide the support needed when applying pressure with the heat-seal device.
Microseal 384 plate positioner — To achieve consistent results in automated processes, such as dispensing and retrieving small volumes (<5 µl) in a PCR plate, precise positioning and uniform well depth are required. Placing a Microseal 384-well PCR plate onto the Microseal 384 plate positioner secures the PCR plate and flattens it if needed. The positioner footprint (127.90 x 85.85 mm) is designed to fit securely into the plate nest of commonly used automated liquid handlers.
Use the filters below to refine results!