Image
Description
Description
Protect your S3 or S3e Cell Sorter from power surges and ensure that outages do not interfere with cell sorting.
This 1,000 watt power conditioner and uninterruptible power supply can provide approximately 30 minutes of backup time, depending on the percent capacity used.
Intended for use internationally outside the United States.
| Percent capacity | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 |
| Typical run times,* hours:minutes |
1:27 | 0:40 | 0:25 | 0:17 | 0:13 | 0:10 | 0:09 | 0:07 | 0:06 | 0:05 |
* Run times are based on new fully charged batteries at 25°C.
Learn more about the features of the S3™ and S3e™ Cell Sorters.
Specifications
Specifications
Input
Voltage
230 V
Voltage range, VAC
172 to 268 V + 5% (on line mode), user adjustable
Frequency, Hz
50 / 60 ± 5%
Input connection
IEC 320–C14 Inlet
Output
Capacity
1,440 VA / 1,000 W
Voltage
230 V (on battery mode)
Waveform
Sine wave
Rated power factor
0.7
Crest factor
3:1
Frequency, Hz
50 / 60 ± 1% (on-battery)
Output connection
8 x IEC320-C13 output receptacles
(2 x 6 ft IEC 320 to IEC 320 extension cords supplied)
(2 x 6 ft IEC 320 to IEC 320 extension cords supplied)
Battery
Voltage
VDC, 48.0 nominal
Battery type
12 V, 5AH sealed lead-acid
Quantity
4 (1 string of 4)
Recharge time
4 hours per battery cabinet to 60%
Temperature
0 to 40°C, operating
–15 to 45°C, transit
–15 to 45°C, transit
Altitude
0–10,000 ft, operating
0–50,000 ft, transit
0–50,000 ft, transit
Humidity
10.0% to 90.0%, noncondensing
Cooling
Forced air convection
Weight, kg
28
Dimensions (W x D x H), cm
44 x 50 x 9
