|
Econo Gradient Pump
|
|
|
Flow range
|
0.1–40 ml/min
|
|
Maximum counterpressure
|
30 psi (2 bar)
|
|
Gradient formation
|
Solenoid-activated proportioning valve
|
|
Detection Performance
|
|
|
UV
|
Single channel, 280/254 nm with auto zero
|
|
Conductivity
|
Detection range: 0.5–500 mS/cm FS
|
|
Temperature range
|
4–40° C
|
|
Sample loading
|
Manual loop fill
|
Technical Specifications: Econo Gradient Pump Kits
|
|
|
Flow rate limit
|
20 ml/min per channel; dual-channel peristaltic pump
|
|
Pressure limit
|
30 psi (0.2 MPa)
|
|
UV detection
|
Optional Model EM-1 Econo UV monitor; 254 and 280 nm filters
|
|
Conductivity
|
Optional Model EG-1 Econo gradient monitor
|
|
Buffer selection/large sample loading
|
Optional SV3-2 valve
|
|
Sample injection
|
Optional MV-6 valve
|
|
General fraction collection
|
BioFrac or Model 2110 fraction collector
|
|
Large-volume fraction collection
|
BioFrac fraction collector with optional prep adaptor
|
|
Small-volume fraction collection
|
BioFrac or Model 2110 fraction collector
|
|
Solvent compatibility
|
All commonly used chromatographic solvents
|
|
Operating temperature
|
4–40° C
|
|
Dimensions (W x D x H)
|
14 x 20 x 20 cm (5.5 x 7.9 x 7.9")
|
|
Weight
|
3.5 kg (7.7 lb)
|
|
Model EP-1 Econo Pump
|
|
|
Number of channels
|
2
|
|
Flow rate range (per channel)
|
0.01–20 ml/min (depending on tubing)
|
|
Tubing diameter
|
0.8–3.2 mm ID
|
|
Maximum backpressure
|
30 psi (2 bar)
|
|
Output signal
|
TTL compatible (~0–5 V active low)
|
|
Operating temperature
|
4–40°C; coldroom compatible
|
|
Material of construction
|
Polypropylene and other solvent-resistant plastics
|
|
Safety
|
Meets IEC 61010 and CSA 22.2 certification
|
|
Dimensions
|
14 x 20 x 22 cm (5.5 x 7.9 x 8.7") with pumphead
|