Log In/Register |
Automated cell counting uses optical methods to count cells in fluid samples for applications such as standardizing experiments and measuring assay impact. The TC20™ automated cell counter assesses total cell count and cell viability within 30 seconds with a broad range of cell types.
The TC20™ automated cell counter has two counting modes. Depending on the sample type, the user-defined gates can be either enabled or disabled.
Samples with Multiple Cell Populations (stem cells and other primary cells)
User-defined gates must be enabled. Once the user-defined gates are enabled, a histogram will be displayed at the beginning of each count and the user can select the population of interest by adjusting the position of the cell size gates. Only objects within the designated range will be analyzed as cells; those with diameters outside of the size range will be excluded from the cell count.
If the user-defined gates are disabled, the cell counting algorithm will automatically determine the population to count without any user input. The algorithm will count the cells of the most predominate cell type that typically comprise the largest peak, which may not be the population the user wants to count.
To make counting of such samples easier, when counting multiple sample replicates, the TC20 cell counter can save the positions of gates and apply them to subsequent counts (choose Yes in the “Use saved gates” field in Gating setup).
If the Image preview is On, an image of cells will be displayed during gating. In the image, only cells with diameters between the selected size gates will be marked with a yellow dot.
Immortal Cell Lines
When counting immortal cell lines or other samples that are composed of cells with similar cell size, the user-defined gates can be disabled. The cell counting algorithm then automatically identifies the cell population of interest without requiring user input.
The data below show the TC20™ automated cell counter is compatible with a broad range of cell types, such as cell lines, primary cells (from tissue or blood), and stem cells. The TC20 cell counter can count cells with a 6–50 µm cell diameter and within a broad concentration range of 5 x 104–1 x 107 cells/ml, which eliminates the need to dilute cells, thus reducing the error associated with sample dilutions prior to counting.
The TC20™ automated cell counter uses microscopy with auto-focus that analyzes multiple focal planes to identify the best plane. The cell counting algorithm then uses the image acquired from the best focal plane to identify cells and exclude debris, thereby calculating the total cell count.
Using auto-focus instead of subjective manual focusing is especially important when assessing cell viability because an incorrectly selected focal plane will lead to inaccurate results.
If trypan blue is detected along with the total cell count, the TC20 counter assesses cell viability. The conventional method of analyzing viability using a single focal plane can lead to inaccurate conclusions because light scattering and the alignment of cells at different heights in a counting chamber can change the appearance of cells — live cells may appear to be dead and vice versa. To determine if cells are viable, the TC20 counter analyzes each cell using images acquired from multiple focal planes during the focusing step.
The TC20 automated cell counter accurately counts cells in one simple step using innovative auto-focus technology and a sophisticated cell-counting algorithm. The TC20 enables accurate mammalian cell counting in less than 30 seconds.
The TC10 automated cell counter provides total cell counting and mammalian cell viability assessment via trypan blue dye exclusion; the TC10 counter will soon be discontinued.
Call us at 1-800-268-0213