PowerPac HV Power Supply #1645056


Output specifications Voltage: 20–5,000 V
Current: 0.01–500 mA
Power: 1–400 W
Type of output Constant voltage, constant current, constant power, or constant temperature
Timer control 1 min–99 hr 59 min, fully adjustable
Volt-hour control 99,000 V-hr
Pause/resume function Yes
Display 128 x 64 pixel, yellow-green backlit graphics LCD
Programmable methods Stores up to 9 basic and 9 IEF methods, each with up to 9 steps
Real-time clock Yes
Automatic recovery after power failure Yes
Temperature control Yes, via temperature probe; 30–90°C ±2°C
Safety features No-load detection; rapid resistance change detection, ground leak detection, overload/short circuit detection, overvoltage protection, over-temperature protection
Operating conditions 0–40°C; 0–95% humidity in absence of condensation
Number of output jacks 4 sets in parallel
Safety compliance EN61010
IQ/OQ protocols Yes
Input power (actual) 90–120 or 198–264 VAC, 50 or 60 Hz, autoswitching
Dimensions (W x D x H), cm/in 7.5 x 34 x 10/3 x 13.4 x 3.9
Weight, kg/lb 2.85/6.3

The PowerPac™ HV power supply supports an output of 5,000 V, 500 mA, and 400 W, which allows its use for all high-voltage applications, including low-current applications in the microampere range. With its 400 W output, the PowerPac HV power supply offers enough power to run the most demanding isoelectric focusing (IEF) experiments or up to four DNA sequencing gels simultaneously. Researchers can easily transfer run data from anywhere in the laboratory using the built-in wireless IR capability. Data can be sent first to a PDA and then to a PC or directly to a PC with a peripheral IR receiving device. (Communication between the PowerPac HV power supply and a PC or PDA requires that PowerPac data transfer software (catalog #164-5097) be installed on a compatible PC.)