TeSeE NSP PrP Purification System



Key Benefits
  • Conditions of sample preparation are monitored for each sample
  • The 8-channel pipetting station is equipped with barometric liquid-level sensors for each channel
High Reproducibility
  • Assay protocol parameters (e.g. incubation time, temperature, volumes) are pre-defined to ensure reproducible conditions of sample preparation between runs
Full Traceability
  • The internal barcode reader allows for positive identification of both sample plate and purification plate
  • TeSeE reagent batch numbers and expiration dates are saved in the TeSeE NSP database
  • The TeSeE NSP system can be linked to the Microplate Manager Software v5.2, allowing for complete traceability throughout the TeSeE assay protocol
Operator's Safety
  • Moving modules of the TeSeE NSP system are not accessible during the run
  • Both instrument covers are equipped with safety sensors to stop the run in case covers are opened
  • An optional ventilation system can be connected to eliminate vapor emission

The TeSeE™ NSP system serves as an automated sample preparation system for transmissible spongiform encephalopathy (TSE) screening. The TeSeE NSP system comes with a software package that allows operation of the instrument (for example, TeSeE NSP control software), database management and backups (for example, TeSeE NSP database manager software), and performance checks of the instrument (TeSeE NSP quality inspection software).

Dimensions (W x D x H) 780 x 1,200 x 430 mm (30.73 x 47.3 x 16.94 in)
Weight ~90 kg (199 lb)
Liquid handling system 8 disposable tips
Tips 300 µl polypropylene disposable
Containers Deepwell plate, reagent reservoirs
Sampling volume 250 µ per nozzle
Precision/reproducibility ±1.0%/<1.0
Mixing method Pipetting
Liquid level detection method Differential pressure
Incubator temperature Fixed at 37°C ±1.0°C
Built-in barcode scanner Optical (red LED)
Handheld scanner LED, good read spot, beeper
Safety sensors Liquid surface sensors, tip attachment sensor, deepwell plate setup sensor, reagent reservoir set-up sensor, unused tip rack number sensor, used tip rack number sensor, cover open/closed sensors
Operating system Windows 2000
Communication system RS232C
Operating temperature/humidity 15°C–30°C/50% relative humidity (RH) at 40°C to maximum 80% RH at 31°C
Input voltage and frequency 100–240 VAC ±10%, 50/60 Hz, 100 VA
Power consumption 900 VA
* Windows is a trademark of Microsoft Corporation  

Account price failed to display. Please try reloading the page. Reload Page

If you are placing an order, you may proceed with your order; the account price will be applied if it is lower than the
list price. If the problem persists, please call customer service at   or send an
email to 

Waste Electrical and Electronic Equipment ("WEEE Directive")

This product contains electrical or electronic material. Learn more about Bio-Rad's EU Recycle Program

Waste Electrical and Electronic Equipment ("WEEE Directive")

This product contains electrical or electronic material. Learn more about Bio-Rad's EU Recycle Program

(Discontinued) TeSeE NSP Quality Inspection Software

1 unit

This product is no longer available. Please contact technical support for more information on replacement product.
TeSeE NSP System

1 unit

List Price:
Your Price:

Communication error

Reload Page

Quantity:   Add to Quote
Add to Hot List