Model EP-1 Econo Pump



Econo Gradient Pump Kits
Econo Gradient Pump Kits

The unique Econo gradient pump is suited for any low-pressure protein purification system. It is the only stand-alone peristaltic pump capable of isocratic and gradient elution applications.

Model EM-1 Econo UV Monitor
Econo UV Monitor (Model EM-1)

The model EM-1 Econo UV monitor is a single-wavelength coldroom compatible detector for flowthrough monitoring of effluents from chromatographic columns, centrifugation gradients, and the like. The optics module includes both 254 and 280 nm filters and a 2 mm pathlength flow cell.

Model 2110 Fraction Collector
Model 2110 Fraction Collector

The Model 2110 fraction collector is a carousel-type fraction collector capable of collecting from 1 drop (~50 µL) to 9 mL fractions in 80 test tubes or microtubes. Collection can be in time, drop, or volume mode when connected to the Model EP-1 Econo pump, BioLogic LP system, or BioLogic DuoFlow system. Small chromatography columns can be mounted to drop forming arm to minimize dead volume. It is coldroom compatible.

Discontinued Product
The Model EP-1 Econo Pump has been replaced by the Econo Gradient Pump (731-9001). However, we will continue to provide support for customers with the Model EP-1 Econo Pump.

The patented Model EP-1 Econo pump is a two-channel, bidirectional, variable-speed peristaltic pump for low-pressure chromatography or for pumping liquids in general laboratory procedures. It offers a full range of features as a stand-alone peristaltic pump and is fully compatible with the BioLogic DuoFlow system. Key features include:

  • Flow rate display (in ml/min) and time or volume control of programs
  • Preset calibration for common tubing sizes (0.8, 1.6, and 3.2 mm ID)
  • Manual calibration for nonstandard-size tubing or when improved flow rate accuracy is desired
  • Control of the Model 2110, BioFrac, or other fraction collectors
  • Control of run length with programmable total run volume
  • Control of SV-3 solenoid diverter valve to divert eluent to fraction collector or waste
Number of channels 2
Flow rate range (per channel) 0.01–20 ml/min (depending on tubing diameter)
Tubing diameter 0.8–3.2 mm ID
Maximum backpressure 30 psi (2 bar)
Output signal TTL compatible (~0–5 V active low)
Operating temperature 4–40°C; coldroom compatible
Material of construction Polypropylene and other solvent-resistant plastics
Safety Meets IEC 61010 and CSA 22.2 certification
Dimensions (W x D x H) 14 x 20 x 22 cm with pumphead

Account price failed to display. Please try reloading the page. Reload Page

If you are placing an order, you may proceed with your order; the account price will be applied if it is lower than the
list price. If the problem persists, please call customer service at   or send an
email to 

(Discontinued) Model EP-1 Econo™ Pump

100/120 V, peristaltic pump, two-channel, bidirectional, variable-speed, for use in low-pressure chromatography
Discontinued item - replaced by Econo Gradient Pump (731-9001)

This product is no longer available. Please contact technical support for more information on replacement product.
Number Description Options
M7318166 Instruction Manual, UV Monitor, UV Lamp Replacement, Rev B Click to download
M7318160 Instruction Manual, Model EM-1 Econo™ UV Monitor, Rev H Click to download
M7318140 Instruction Manual, Model EP-1 Econo™ Pump, Rev J Click to download