Size exclusion chromatography (SEC) separates molecules based on their size by filtration through a gel. The gel consists of spherical beads containing pores of a specific size distribution. Separation occurs when molecules of different sizes are included or excluded from the pores within the matrix. Small molecules diffuse into the pores and their flow through the column is retarded according to their size, while large molecules do not enter the pores and are eluted in the column's void volume. Consequently, molecules separate based on their size as they pass through the column and are eluted in order of decreasing molecular weight (MW).
Operating conditions and gel selection depend on the application and the desired resolution. Two common types of separations performed by SEC are fractionation and desalting (or buffer exchange.) Here we provide an overview of SEC and general considerations.
Related Topics: Affinity Chromatography, Ion Exchange Chromatography, Hydrophobic Interaction Chromatography, Mixed-Mode Chromatography, Low Pressure Chromatography Systems and Medium Pressure Chromatography Systems.
Bio-Rad offers a number of media choices for SEC:
Size Exclusion Chromatography Media Selection Guide
* Row rates determined in a 1.5 x 70 cm column using a hydrostatic pressure head-to-bed ratio of 1:1.
Although SEC does not discern similar MW species particularly well, it is very good at separating molecules that may not be fully resolved by other methods like IEX or HIC. As such, it is often reserved for the final "polishing" step of purification. The resolution of separation depends on particle size, pore size, flow rate, column length and diameter, and sample volume. Generally, the highest possible resolution is the ability to measure a twofold difference in MW. This is obtained with moderate flow rates , long, narrow columns, small particle size gels, small sample volumes (1–5% of the total column or bed volume), and a sample viscosity that is the same as the eluent.
With proper column calibration using MW standards, the molecular weights of unknown molecules can be measured. Molecular weight estimates by column chromatography can be quite accurate for globular proteins and less accurate for other, more linear, molecules like DNA.
The elution volume (Ve) decreases nearly linear with the log of the molecular hydrodynamic volume. A few proteins or standards of known MW are used for calibrating the columns. Bio-Rad offers a useful Gel Filtration Standard. This calibration standard contains thyroglobulin (670 kD), to determine the void volume (Vo) of the column, as well as four additional proteins of 158, 44, 17, and 1.35 kD respectively. Analysis using any standard is carried out by dividing the Ve of the standards by the Ve of the thyroglobulin (Ve/Vo) and plotting against the log of the MW of the standard.
For desalting applications, the difference in MW between the molecule of interest and salt or buffer molecules is so large that these peaks are less likely to overlap. Therefore sample volume can be as much as 30% of the total bed volumes, and shorter, wider columns may be used.
Call us at 1-800-4-BIORAD (1-800-424-6723)
Please reenter your email address in the correct format.
Please enter your email address.
Your subscription information already exists, we will send you an email with specific instructions to manage your existing subscription profile.
To receive the latest news, promotions, and more, sign up for Bio-Rad updates by entering your email address below. You can elect to receive only the types of Bio-Rad communications that are of interest to you..
Copyright © 2017 Bio-Rad Laboratories, Inc. All rights reserved.