Cation Exchange Chromatography

print

Overview

Cation exchange chromatography is a form of ion exchange chromatography (IEX), which is used to separate molecules based on their net surface charge. Cation exchange chromatography, more specifically, uses a negatively charged ion exchange resin with an affinity for molecules having net positive surface charges. Cation exchange chromatography is used both for preparative and analytical purposes and can separate a large range of molecules from amino acids and nucleotides to large proteins. Here, we focus on the preparative cation exchange chromatography of proteins.

Related Topics: Anion Exchange Chromatography, Ion Exchange Chromatography, Types of Chromatography, Column Chromatography Methods and Instrumentation, Medium-Pressure Chromatography


Cation Exchange Chromatography Principles

Positively charged particle

Fig. 1. Schematic diagram of a cation exchange media particle.

A protein’s net surface charge changes with pH in a manner that is dictated by a protein’s isoelectric point, or pI. At a pH equal to a protein’s pI, the protein will carry no net charge. At a pH below the pI, the protein will carry a net positive charge. If the buffer pH is raised above a protein’s pI, it will carry a net negative charge.

Because a protein’s pI is determined by its primary amino acid sequence and can thus be calculated, a buffer can then be chosen that ensures a known net charge for a protein of interest. A negatively charged cation exchange resin is thus chosen when the protein of interest carries a net positive charge at the working pH. Proteins with different pI values will have varying degrees of charge at a given pH and thereby have different affinities for the positively charged surface groups on the particles of the anion exchange media; therefore, different proteins will bind to the resin with different strengths, facilitating their separation.

At a particular loading buffer pH, all appropriately charged proteins will bind the resin. For example, if a cation exchange resin is used at a pH of 7.5, in general, all proteins that have a pI >7.5 will carry a net positive charge and will bind the negatively charged resin. A salt gradient is then used to separate the protein of interest from other bound proteins — proteins will be eluted in an order depending on their net surface charge. Proteins with pI values closer to 7.5 will elute at a lower ionic strength, and proteins with very high pI values will elute at a high salt concentration.

Cation Exchange Chromatography Workflow

All ion exchange chromatography relies on electrostatic interactions between the resin functional groups and proteins of interest; thus, the workflow below is given as a generalized IEX workflow, and particular running conditions for cation exchange chromatography may be adjusted to best suit your protein of interest, the buffer system, and the anion exchange resin chosen. Because buffer pH and ionic strength greatly affect protein binding to the column resin, it is very important to ensure that buffer pH is properly titrated and that appropriate counterions are used.

  1. Buffer preparation
  2. Buffer pH and ionic strength are crucial for all forms of ion exchange chromatography. It is best to readjust buffer pH after salt concentration has been adjusted and ensure that buffer counterions are compatible. Buffer counterions should have the same charge as the resin; for negatively charged cation exchange resins, phosphate buffers are an excellent choice.

  3. Column equilibration
  4. Equilibrate the column until pH and conductivity readings stabilize (typically requires 3–5 column volumes of buffer).

  5. Sample loading
  6. Because ionic strength and pH are the main determinants of protein binding to IEX resins, whenever possible, load sample in the starting buffer that was used to equilibrate the column and that will be used to wash the column.

  7. Column washing
  8. Wash the column in loading buffer (0% Buffer B) until no protein is detected in the flowthrough (≥5 column volumes).

  9. Elution
  10. Protein can be eluted either in a linear, gradient elution or using a step isocratic elution. Often, a gradient elution may be used to optimize elution conditions. Once the elution profile of the protein of interest has been established and it is known at what ionic strength or pH a protein elutes, a step elution can be used to speed the purification process.

    Gradient Elution

    Gradient Elution

    Step Elution

    Step Elution

    Fig. 2. Gradient vs. step elution. Plots illustrating protein separation with a typical cation exchange column when the A/B buffer ratio is changed in either a linear gradient (left) or stepwise (right) isocratic manner. Protein concentration in the effluent is reported as A280 (). Buffer composition during the binding and elution phases is shown as percentage B ().

    Note: pH gradients are generally not effective for ion exchange elution because it is very difficult to generate reliable linear pH gradients without altering ionic strength. If pH is used for elution, step gradients may provide more consistent results.

  11. Column stripping and equilibration

After the protein of interest has been eluted, proteins that remain bound to the column resin are eluted by increasing the ionic strength or altering the pH of the elution buffer. After all remaining protein has been eluted from the resin, equilibrate the column in low ionic strength buffer. A good choice would be the starting buffer for purification if the column will be used in the near future. A common way to prevent microbial growth during long term storage is to exchange the column buffer for 20% ethanol in water. Refer to the resin/column manufacturer for storage recommendations.

Cation Exchange Resin Selection

Cation Exchanger vs. Anion Exchanger

The net charge of the molecule(s) of interest determines resin choice. If positively charged molecules are to be immobilized by the column resin, a cation exchange resin is chosen, whereas a positively charged anion exchange resin is chosen if negatively charged molecules are to be captured by the resin.

For applications such as removing negatively charged DNA or endotoxins, a strong anion exchange column such as Bio-Rad’s ENrich™ Q chromatography column is an excellent choice. A negatively charged cation exchange resin would not immobilize and cannot remove DNA or endotoxins from the sample.

Unlike DNA, proteins are zwitterionic and thus can carry either a net positive or a net negative charge. Buffer pH will dictate the protein’s net charge. In theory, each protein could be purified using either a cation or an anion exchanger. In practice, proteins are not stable at every pH — a pH that would render a protein of interest positively charged might also denature the protein. Protein stability and buffer choice therefore dictate IEX media choice for protein purification.

Cation Exchange Resin Application Guide

Bio-Rad offers a wide variety of cation exchange resins both in prepacked column form and as bulk media that can be packed into empty chromatography columns. Choose the cation exchange resin that meets your needs from the table below, or contact technical support for assistance.

    Suitability**  
Media Type Packaging
Format*
Analytical
Scale
Pilot/
Preparative
Scale
Process
Scale
Application
AG® 50W B, GC ++++ ++ + Strong exchanger. Lower degree of crosslinking, useful for peptide and nucleotide separation; higher crosslinkages useful for small peptide and metals separation or cation removal; gravity or low-pressure use
AG® MP-50 B, GC ++++ ++ + Strong exchanger. Macroporous equivalent to AG 50W for MW >1,000,000; gravity or low-pressure use
Bio-Rex™ MSZ 501 B ++++ ++ ++ Same as AG 50 but with more uniform bead size; large bead size (650 μm) makes it ideal for large-scale (column or batch) industrial applications
Bio-Rex 70 B ++++ ++ ++ Weak exchanger. High capacity for high MW (>1,000,000) solutes; can be used for purification and fractionation of peptides, proteins, enzymes, and other cationic molecules. Amenable to large-scale purification
Chelex® 100 B, GC ++++ +++ + Weak exchanger. Chelating resin removes metals and is suitable for PCR applications; can also be used for ultrapurification of buffers and ionic reagents; gravity or low-pressure use. Available in molecular biology and biotechnology grades
UNO® S MPC ++++     Strong exchanger. High-resolution biomolecule separation at high flow rates; pH stability 2–12
Macro-Prep® 25 S B ++++ ++++ + Strong exchanger. Similar to Macro-Prep High S, but 25 μm particle size allows higher-resolution separation; unique surface chemistry allows contaminant removal; pH stability 1–10
Macro-Prep
High S
B, C +++ ++++ + Strong exchanger. High-capacity biomolecule separation; unique surface chemistry allows contaminant removal; pH stability 1–10
Macro-Prep CM B +++ ++++ + Weak exchanger. High-capacity biomolecule separation; unique surface chemistry
allows contaminant removal; pH stability 1–10
UNOsphere™ S B, C ++++ ++++ ++++ Strong exchanger. High-capacity biomolecule separation; pH stability 1–14
UNOsphere Rapid S B, C ++++ ++++ ++++ Strong exchanger. Similar to UNOsphere S but with enhanced chemistries to overcome the pH shift that occurs with conductivity transitions and faster equilibration times; pH stability 1–14
Nuvia™ S B, C ++++ ++++ ++++ Strong exchanger. Similar to UNOsphere S but surface modification allows extremely high-capacity biomolecule separation; pH stability 1–14
ENrich S  MPC +++
 ++++  + Strong exchanger. High-resolution biomolecule separation at high flow rates; pH stability 2–14

* B, bottle; C, cartridge (1 ml or 5 ml); GC, gravity column; SC, spin column; HPLC, high-pressure column; MPC, medium-pressure column.

** +, low suitability; ++, moderate suitability; +++, suitable; ++++, high suitability.

Ask an Expert

Call us at 1-800-268-0213

Sign Up for Bio-Rad Updates!
Enter your email address below to receive your choice of the latest news, promotions, and more.